A green blast of disco in delicious pistachio tones! Lamboy is a deep green hybrid polish with pistachio flecks and a golden, sparkling glow. When you move your hand, it works with the light, revealing its different facets. Lamboy will surprise you with an iridescent shine that changes its appearance again and again.

Curing time
Type and power of the lamp / One layer curing time
MULTILED Lamp 36 W — 30 s

Product attributes
Soluble in remover? Yes
Consistency: creamy
Coverage: 45%
Dispersion layer: present

Benefits
A cohesive collection in line with upcoming trends
In flash lighting, the hybrid polish produces a delicate flash effect

Application tips
Remember to disinfect the hands first (yours and your clients’). Put on gloves, then assess the condition of your client’s hands and nails and check whether there are any contraindications to the procedure.
Push back the cuticles (using a cuticle pusher or a wooden stick) and remove them with an e-file bit (e.g. Cuticle 9).
Gently and evenly matt the nail plate using a 100/180 grit buffer and remove any dust with a soft brush.
Soak a lint-free cotton pad in the Classic Cleaner and thoroughly degrease the nail plate.
Apply an appropriate primer — 90% of the time it will be the Acid Free Primer. For a more demanding nail plate, use an Acid Primer. Apply a minimal amount only onto the natural nail plate, without touching the cuticles.

Apply a thin layer of a selected gel polish base and cure it for 30 seconds in the Multi LED lamp.
If the nails are weak or naturally flat, you can apply two building layers, e.g. Protein Base, Mineral Base or Whitemin Base.
Cure a thicker layer of base in the Multi LED lamp for 60 seconds.
If the surface of the base requires filing, remove the sticky layer using a cotton pad soaked in the Wipe Off Cleaner.
Use a 100/180 grit file or buffer to smooth out the surface of the base.
Remove the dust with a soft brush and clean the surface again with the Classic Cleaner or the Wipe Off Cleaner.

Apply the first thin layer of colour and cure for 30 seconds.
Apply the second layer of colour and cure for 30 seconds.
To perfectly finish your styling use an appropriate top coat (e.g. Tip Top or Wet Look).
Cure the top coat for 30–60 seconds in the Multi LED lamp.
Wait approximately 1 minute after removing the hand from the lamp.

If you have chosen a top coat that doesn’t leave a sticky layer after curing, choose a protein serum, keratin shea elixir or your favourite cream to finish off the styling.
If you used a top coat with a sticky layer, wipe each nail with a lint-free cotton pad soaked in the Shea Super Shine Effect Cleaner.
For even more shine, polish the finished nails with a dry cotton pad.

The styling is READY!

Composition (INCI):
Hydroxypropyl Methacrylate, Polyether Urethane Methacrylate, Aliphatic Urethane Methacrylate, Silica Dimethyl Silylate, PPG-3 Glyceryl Ether Triacrylate, Silica, Ethyl Trimethylbenzoyl Phenylphosphinate, Epoxy Acrylate, Bis(Methacryloyloxyethyl) Phosphate, Acrylic Acid, Polyester Acrylate, Polymethyl Methacrylate, Phosphoric Acid, BHT, p-Hydroxyanisole +/- CI [15880, 16035, 19140, 77491, 77499, 77891, 77007, 77000]

Warnings
For professional use only. Avoid skin contact. Read directions for use carefully. Keep out of reach of children. In case of contact with eyes, rinse with plenty of water and seek medical advice. May cause skin and eye irritation. Avoid exposure to dust. May cause an allergic reaction.

Responsible person: Indigo Nails sp. z o.o., ul. Senatorska 14/16, 93-192 Łódź, Poland, shop@indigo-nails.com