Description
Pan Ananas is a unique shade of yellow with a touch of green. It looks beautiful on tanned skin and adds a fresh twist to classic looks.
Curing time
Lamp: MULTILED 36 W
Curing time of 1 layer: 30 s
Product attributes
Soluble in remover: yes
Consistency: creamy
Dispersion layer: present
Benefits
Beautiful yellow shade
Fluid, creamy texture – no streaks or flooded cuticles
Safe formula
No chipping
Easy application – perfect for gel polish manicure
Perfect for creating a variety of designs
Application tips
Remember to disinfect the hands first (yours and your client’s). Put on gloves, then assess the condition of the hands and nails and check for any contraindications to the procedure.
Push back the cuticles (using a cuticle pusher or a wooden stick) and remove them with an e-file bit (e.g. Cuticle 9).
Gently and evenly matt the nail plate using a 100/180 grit buffer and remove any dust with a soft brush.
Soak a lint-free cotton pad in the Classic Cleaner and thoroughly degrease the nail plate.
Apply an appropriate primer – in 90% of cases it will be the Acid Free Primer. For more demanding nail plates, use an Acid Primer.
Regardless of the chosen product, apply a minimal amount only onto the natural nail plate, without touching the cuticles.
Apply a thin layer of the selected base and cure for 30 seconds in the Multi LED lamp.
If the nails are weak or naturally flat, you can apply two building layers, e.g. Protein Base, Mineral Base or Whitemin Base.
Cure a thicker layer of the base in the Multi LED lamp for 60 seconds.
If the base surface requires filing, remove the sticky layer using a lint-free cotton pad soaked in Wipe Off Cleaner.
Use a 100/180 grit file or buffer to smooth the surface.
Remove the dust with a soft brush and clean the surface again with Classic Cleaner or Wipe Off Cleaner.
Apply the first thin layer of the chosen gel polish and cure for 30 seconds.
Apply the second layer of colour and cure for 30 seconds.
To perfectly finish the styling, use an appropriate top coat (e.g. Tip Top or Wet Look).
Cure the top coat for 30–60 seconds in the Multi LED lamp.
Wait approximately 1 minute after removing the hand from the lamp.
If you used a top coat without a sticky layer, finish with a protein serum, keratin shea elixir or your favourite cream.
If you used a top coat with a sticky layer, wipe each nail with a lint-free cotton pad soaked in Shea Super Shine Effect Cleaner.
Want even more shine? Polish the finished nails with a dry cotton pad.
The styling is READY!
Composition
Di-HEMA Trimethylhexyl Dicarbamate, HEMA, Ethyl Trimethylbenzoyl Phenylphosphinate, Cellulose Acetate Butyrate, Silica, BHT +/-: Bis(Glycidoxyphenyl)propane/Bisaminomethylnorbornane Copolymer, Calcium Aluminum Borosilicate, Calcium Sodium Borosilicate, CI [15850, 15880, 16035, 19140, 42090, 77491, 77492, 77499, 77510, 77742, 77891, 45380, 45410, 60725, 77002, 77007, 47005, 47000, 77861, 77266, 561300, 21108, 77480, 77820, 45370, 77000, 12085, 73915,12370], Mica, Polyethylene Terephthalate, Synthetic Fluorphlogopite, Polyurethane-33, Polyurethane-11, Bis(T-Butyl Benzoxazolyl) Thiophene
Warnings
For professional use only. Avoid skin contact. Read directions for use carefully. Keep out of reach of children. In case of contact with eyes, rinse with plenty of water and seek medical advice. May cause skin and eye irritation. Avoid exposure to dust. May cause an allergic reaction.
Responsible person
Indigo Nails sp. z o.o., ul. Senatorska 14/16, 93-192 Łódź, Poland, shop@indigo-nails.com