Neonidas gel polish allows you to create a phenomenal manicure in an intense blue shade. Brave, bold and confident? Express it with a vibrant neon blue from the Fluomania Collection.

Curing time
Lamp type and power — One layer curing time
MULTILED Lamp 36 W — 30s

Product attributes
Soluble in remover: yes
Consistency: creamy
Dispersion layer: present

Benefits

• Beautiful neon blue shade

• Smooth, creamy texture — no streaks and no flooded cuticles

• Safe formula

• No chipping

• Easy to apply — perfect for gel polish manicure

• Perfect for creating a variety of designs

Application tips
Remember to disinfect the hands first (yours and your client’s). Put on gloves, then assess the condition of the hands and nails and check whether there are any contraindications.
Push back the cuticles (using a cuticle pusher or a wooden stick) and remove them with an e-file bit (e.g. Cuticle 9).
Gently and evenly matt the nail plate using a 100/180 grit buffer and remove dust with a soft brush.
Soak a lint-free cotton pad in Classic Cleaner and thoroughly degrease the nail plate.
Apply an appropriate primer — in 90% of cases it will be Acid Free Primer. For more demanding nail plates, use Acid Primer.
Apply a minimal amount only onto the natural nail plate, without touching the cuticles.

Apply a thin layer of the selected gel polish base and cure it for 30 seconds in the Multi LED lamp.
If the nails are weak or naturally flat, apply two building layers, e.g. Protein Base, Mineral Base or Whitemin Base.
Cure a thicker base layer for 60 seconds.
If the base surface requires filing, remove the sticky layer using a lint-free pad soaked in Wipe Off Cleaner.
Smooth the surface using a 100/180 grit file or buffer.
Remove dust with a soft brush and clean the surface again with Classic Cleaner or Wipe Off Cleaner.
Apply the first thin layer of the chosen gel polish and cure for 30 seconds.
Apply the second layer of colour and cure for 30 seconds.
To perfectly finish your styling use an appropriate top coat (e.g. Tip Top or Wet Look).
Cure the top coat for 30–60 seconds in the Multi LED lamp.
Wait approximately 1 minute after removing the hand from the lamp.

If you have chosen a top coat that doesn’t leave a sticky layer after curing, use a protein serum, keratin shea elixir or your favourite cream to finish the styling.
If you used a top coat with a sticky layer, wipe each nail with a lint-free cotton pad soaked in Shea Super Shine Effect Cleaner.
Do you want the styling to be even shinier? Polish the finished nails with a dry cotton pad.

The styling is READY!

Composition
Di-HEMA Trimethylhexyl Dicarbamate, HEMA, Ethyl Trimethylbenzoyl Phenylphosphinate, Cellulose Acetate Butyrate, Silica, BHT +/-: Bis(Glycidoxyphenyl)propane/Bisaminomethylnorbornane Copolymer, Calcium Aluminum Borosilicate, Calcium Sodium Borosilicate, CI [15850, 15880, 16035, 19140, 42090, 77491, 77492, 77499, 77510, 77742, 77891, 45380, 45410, 60725, 77002, 77007, 47005, 47000, 77861, 77266, 561300, 21108, 77480, 77820, 45370, 77000, 12085, 73915,12370], Mica, Polyethylene Terephthalate, Synthetic Fluorphlogopite, Polyurethane-33, Polyurethane-11, Bis(T-Butyl Benzoxazolyl) Thiophene

Warnings
For professional use only. Avoid skin contact. Read directions for use carefully. Keep out of reach of children. In case of contact with eyes, rinse with plenty of water and seek medical advice. May cause skin and eye irritation. Avoid exposure to dust. Can cause an allergic reaction.

Responsible person
Indigo Nails sp. z o.o., ul. Senatorska 14/16, 93-192 Łódź, Poland, shop@indigo-nails.com