A deep purple gel polish that will surely make a lot of noise! Ultra-feminine, intriguing, yet brave and determined. Oh yes! Miss Afera always knows what she wants.
Curing time
Lamp type: MULTILED Lamp 36 W
Curing time of 1 layer: 30 s
Product attributes
Application: gel polish styles
Soluble in remover: yes
Consistency: creamy
Dispersion layer: present
Benefits
• Beautiful deep colour
• Fluid, creamy texture – no streaks or flooded cuticles
• Safe formula
• No chipping
• Easy to apply – perfect gel polish manicure
• Perfect for creating a variety of designs
Application tips
Remember to disinfect the hands first (yours and your clients’). Put on gloves, then assess the condition of your client’s hands and nails and check whether there are any contraindications to the procedure. Push back the cuticles (using a cuticle pusher or a wooden stick) and remove them with an e-file bit (e.g. Cuticle 9). Make sure to matt the nail plate gently but evenly using a 100/180 grit buffer and remove any dust with a soft brush. Soak a lint-free cotton pad in the Classic Cleaner and thoroughly degrease the nail plate. Apply an appropriate primer – 90% of the time it will be the Acid Free Primer. For a more demanding nail plate, use an Acid Primer. Apply it in a minimal amount only onto the natural nail plate, without touching the cuticles.
Apply a thin layer of a selected gel polish base and cure it for 30 seconds in the Multi LED lamp. If the nails are weak or naturally flat, you can apply two building layers (e.g. Protein Base, Mineral Base or Whitemin Base). Cure a thicker layer of base in the Multi LED lamp for 60 seconds. If the surface of the base requires filing, remove the sticky layer using a cotton pad soaked in the Wipe Off Cleaner. Smooth the surface with a 100/180 grit file or a buffer, remove the dust with a soft brush and clean the surface again with the Classic Cleaner or the Wipe Off Cleaner.
Apply the first thin layer of colour and cure it in the Multi LED lamp for 30 seconds. Apply the second layer and cure for 30 seconds. To perfectly finish your styling, use an appropriate top coat (e.g. Tip Top or Wet Look). Cure the top coat for 30–60 seconds in the Multi LED lamp. Wait approximately 1 minute after removing the hand from the lamp. If you have chosen a top coat that doesn’t leave a sticky layer after curing, apply a protein serum, keratin shea elixir or your favourite cream. If you used a top coat with a sticky layer, wipe each nail with a lint-free cotton pad soaked in the Shea Super Shine Effect Cleaner. Want even more shine? Polish the finished nails with a dry cotton pad.
The styling is READY!
Composition
Di-HEMA Trimethylhexyl Dicarbamate, HEMA, Ethyl Trimethylbenzoyl Phenylphosphinate, Cellulose Acetate Butyrate, Silica, BHT +/-: Bis(Glycidoxyphenyl)propane/Bisaminomethylnorbornane Copolymer, Calcium Aluminum Borosilicate, Calcium Sodium Borosilicate, CI [15850, 15880, 16035, 19140, 42090, 77491, 77492, 77499, 77510, 77742, 77891, 45380, 45410, 60725, 77002, 77007, 47005, 47000, 77861, 77266, 561300, 21108, 77480, 77820, 45370, 77000, 12085, 73915, 12370], Mica, Polyethylene Terephthalate, Synthetic Fluorphlogopite, Polyurethane-33, Polyurethane-11, Bis(T-Butyl Benzoxazolyl) Thiophene
Warnings
For professional use only. Avoid skin contact. Read directions for use carefully. Keep out of reach of children. In case of contact with eyes, rinse with plenty of water and seek medical advice. May cause skin and eye irritation. Avoid exposure to dust. May cause an allergic reaction.
Responsible person:
Indigo Nails sp. z o.o., ul. Senatorska 14/16, 93-192 Łódź, Poland, shop@indigo-nails.com