Description
Giorgio Banani – the inspiration for this shade comes straight from nature. The divine, warm tone of bananas ripening in the exotic sun makes you smile even on cloudy days.
Curing time
Type and lamp power – One layer curing time
MULTILED Lamp 36 W – 30s
Product attributes
Application: gel polish styles
Soluble in remover: yes
Consistency: creamy
Dispersion layer: present
Benefits
• Beautiful sunny yellow shade
• Smooth, creamy texture – no streaks or flooded cuticles
• Safe formula
• No chipping
• Easy application – perfect gel polish manicure
• Perfect for creating a variety of designs
Application tips
Disinfect the hands first (yours and your client’s). Put on gloves, then assess the condition of the hands and nails and check whether there are any contraindications to the procedure.
Push back the cuticles (using a cuticle pusher or a wooden stick) and remove them with an e-file bit (e.g. Cuticle 9).
Gently matt the nail plate using a 100/180 grit buffer and remove any dust with a soft brush.
Soak a lint-free cotton pad in the Classic Cleaner and thoroughly degrease the nail plate.
Apply an appropriate primer – in 90% of cases it will be the Acid Free Primer. For a more demanding nail plate, use an Acid Primer. Apply in a minimal amount only onto the natural nail plate, without touching the cuticles.
Apply a thin layer of a selected gel polish base and cure for 30 seconds in the Multi LED lamp.
If the nails are weak or naturally flat, apply two building layers (e.g. Protein Base, Mineral Base or Whitemin Base).
Cure a thicker base layer for 60 seconds in the Multi LED lamp.
If the base surface requires filing, remove the sticky layer using a lint-free cotton pad soaked in Wipe Off Cleaner.
Smooth the surface using a 100/180 grit file or buffer.
Remove dust with a soft brush and clean the surface again with Classic Cleaner or Wipe Off Cleaner.
Apply the first thin layer of colour and cure for 30 seconds in the Multi LED lamp.
Apply the second layer and cure for 30 seconds.
To finish, apply a top coat (e.g. Tip Top or Wet Look).
Cure the top coat for 30–60 seconds in the Multi LED lamp.
Wait approximately 1 minute after removing the hand from the lamp.
If you chose a top coat without a sticky layer, finish with a protein serum, keratin shea elixir or your favourite cream.
If you used a top coat with a sticky layer, wipe each nail with a lint-free cotton pad soaked in Shea Super Shine Effect Cleaner.
For extra shine, polish the finished nails with a dry cotton pad.
The styling is ready!
Composition
Di-HEMA Trimethylhexyl Dicarbamate, HEMA, Ethyl Trimethylbenzoyl Phenylphosphinate, Cellulose Acetate Butyrate, Silica, BHT +/-: Bis(Glycidoxyphenyl)propane/Bisaminomethylnorbornane Copolymer, Calcium Aluminum Borosilicate, Calcium Sodium Borosilicate, CI [15850, 15880, 16035, 19140, 42090, 77491, 77492, 77499, 77510, 77742, 77891, 45380, 45410, 60725, 77002, 77007, 47005, 47000, 77861, 77266, 561300, 21108, 77480, 77820, 45370, 77000, 12085, 73915,12370], Mica, Polyethylene Terephthalate, Synthetic Fluorphlogopite, Polyurethane-33, Polyurethane-11, Bis(T-Butyl Benzoxazolyl) Thiophene
Warnings
For professional use only. Avoid skin contact. Read directions for use carefully. Keep out of reach of children. In case of contact with eyes, rinse with plenty of water and seek medical advice. May cause skin and eye irritation. Avoid exposure to dust. Can cause an allergic reaction.
Responsible person: Indigo Nails sp. z o.o., ul. Senatorska 14/16, 93-192 Łódź, Poland, shop@indigo-nails.com