1. Apply a coat of Hybrid Base and allow to dry in the lamp.

2. Apply a coat of your favorite hybrid polish and dry in the lamp.

3. Apply a thin layer of hybrid base without allowing it to harden.

4. Place the cut slider on a damp cotton pad for about 20-30 seconds.

5. Carefully slide the slider onto the hybrid base, align it and trim the perimeter of the sticker.

Apply an acid-free primer and allow it to dry.

6. Secure with 1-2 coats of topcoat or one coat of base and hybrid topcoat.

Dimentions: 8,8 x 5 cm